Description One 4' X 10' Duct Board CASE

NOTE: Freight charges can be very expensive if shipped alone.

Knauf, Owens Corning or equivalent Air Duct Board-AGM is a resin-bonded fiber glass formed into rigid, rectangular boards faced on one side with a fire-resistant foil-scrim-kraft (FSK) vapor retarder and a lightweight fiber glass mat on the airstream surface. Available in EI-475 or EI-800, with a butt edge or a factory-molded shiplap edge, it offers excellent thermal and acoustical performance.

Application

Features

• Low thermal conductivity of 0.23 at 75°F (24°C) mean temperature.
• Low installed cost,
• Excellent acoustical characteristics.
• Non-woven all-glass mat facing on the airstream surface.
• Assured insulation thickness, shiplap joints, and FSK vapor retarder.
• If necessary, can be cleaned in accordance with NAIMA's
• Knauf, Owens Corning or equivalent Air Duct Board systems meet the fire and smoke safety regulations of most federal, state, and local building codes.

Benefits

• Fabrication in shop environment lowers field installation time.
• One craft required to fabricate and install system.
• Minimum capital investment for fabrication equipment.
• Portability allows for assembly or fabrication at site.
• AGM facing ensures a smoother airstream surface for a cleaner cut and added durability.
• Condensation control.
• Strong thermal performance.

Specification Compliance

In U.S.:

• ASTM C 1136; Type II (FSK facing)
• ASTM D 5116
• ASTM G 21, G 22
• BOCA
• CABO
• California Title 24
• Corps of Engineers Guide Specifications
• ICBO
• International Mechanical Code
• NFPA 90A and 90B
• SBCCI
• UL 181; Class 1

In Canada:

• CAN/ULC S102-M88
• CAN/CGSB 51-GP-52M (facing)
• CAN/CGSB 51.10-92
• ULC Issue 869C; Class 1

Technical Data

• UL/ULC listed.
• Does not exceed 25 Flame Spread, 50 Smoke Developed when tested in accordance with ASTM E 84, CAN/ULC S102-M88, NFPA 255, and UL 723.

Flexural Rigidity

• Available in two stiffness values: EI-475 and EI-800.
• Flexural rigidity (EI) is the product of Young's modulus of elasticity (E) and moment of inertia (I) as determined in accordance with NAIMA AHS-100-74.

Service Temperature (ASTM C 411)

• Up to 250°F (121°C).

Air Velocity (UL 181)

• Maximum 5000 fpm (1524 mpm).
• Tested to 12,500 fpm (3810 mpm).

Internal Static Pressure (UL 181)

• Maximum ±2" water (498 pascals [Pa]).

Water Vapor Permeance (ASTM E 96)

• Less than 0.02 perms.

Water Vapor Sorption (ASTM C 1104)

• Less than 5% by weight.

Microbial Growth (ASTM G 21, G 22, UL 181)

• Does not promote or support the growth of mold, fungi, or bacteria.

Application and Specification Guidelines

Storage

• Protect stored board from water damage, construction damage, and other abuse.
• If stored outside, proper protection from weather conditions should be provided.

Application

• 
  PRESSURE-SENSITIVE TAPES: Only those tapes listed under and imprinted with designation UL 181 A-P and registered with UL.
  HEAT-SEALABLE TAPES: Only those tapes listed under and imprinted with designation UL 181 A-H and registered with UL.
  MASTICS: Mastic systems listed and registered with UL and carrying the designation UL 181 A-M used in conjunction with a 3" (76 mm) wide glass fabric.

Procedures

Notes