 |
 |
 |
 |
|
 |
|
Features
RA14AZ Condenser Features and Benefits
- Lighter Footprint
& Less Environmental Impact from New 7mm Condenser Coil provided by a
decrease in refrigerant requirements and an overall weight reduction
- Efficient Cooling up to 14.3 SEER2/11.7 EER2
-
PlusOne Expanded Value Space: 3in- 4in- 5 in service valve space-
provides a minimum working area of 27-square inches for easier access
-
PlusOne Triple Service Access: 15 in wide, industry leading corner
service access- makes repairs easier and faster. The two fastener,
removable corner allows optimal access to internal unit components.
Individual louver panels come out once fastener is removed, for faster
coil cleaning and easier cabinet reassembly
- System Matching Simplicity- matches to all tiers of gas furnaces
- Modern cabinet aesthetics- High curb appeal with visually appealing design
- Curved louver panels- provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
- Diagnostic service window with two-fastener opening- provides access to the high and low pressure.
- External gauge port access- allows easy connection of “low-loss” gauge ports
- QR code- provides technical information on demand for faster service calls
- Fan motor harness with extra-long wires allows unit top to be removed without disconnecting fan wire.
RCFZ Coil Features and Benefits:
- Rheem Indoor Furnace cased coils are designed for use with Rheem outdoor
units and are available for vertical upflow or downflow, and horizontal
left or horizontal right airflow. When matched with Rheem outdoor units,
the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW]
to 60,00 BTU/HR [17.6 kW]
- Constructed of aluminum fins bonded to internally grooved aluminum tubing
- Coils are tested at the factory with an extensive refrigerant leak check
- Coils have copper sweat refrigerant connections
- Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection
- Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only)
- Approved for system application with variety of Rheem outdoor units
- Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material
- Compatible with Germicidal Light System (UV resistant)
- Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right
- Unique drain pan design maximizes application flexibility and condensate removal.
- Coil design maximizes performance and minimizes height required at installation
R801T Furnace Features and Benefits
- PlusOne Diagnostics: Industry-first, 7-segment LED for quick & easy service
- PlusOne Ignition System: Proven Direct Spark Ignition (DSI) for reliability and longevity
- Low Profile, 34-inch Cabinet: Makes our furnaces ideal for space-constrained installations
-
Hemmed Cabinet & Door Edges and Quarter-Turn Door Fasteners
(Upflow/Horizontal only): Allows for safe, toolless access and
serviceability
- Removable Heat Exchanger: Built with a primary
aluminized steel and secondary stainless steel construction, provides
maximum corrosion resistance, thermal fatigue reliability and improved
serviceability
- Pre-Marked Hoses: Offers easier identification and installation
- Blower Shelf Design: Ensures serviceability in all furnace orientations
-
Replaceable Collector Box: Enables replacement of only the collector
box, and doesn’t require replacement of the heat exchanger
- Venting with 2 or 3-inch PVC: Offers options that can be used on all furnace heating input sizes
-
Self-Priming Condensate Trap: Allows for on-going water saturation
within the trap to keep it primed, and eliminates the need for seasonal
service on the condensate trap
|
|
|
|
|
|
|
